You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Solar Kit Support > Solar Charging Kit Support > Solar Kit Installation: Required Tools
Solar Kit Installation: Required Tools
print icon

Here is a list of the tools required to properly install a Go Power! solar charging kit: 

 

a. Screwdriver (Phillips)
b. Keyhole Saw
c. Pencil or Marker
d. Pliers
e. Wire Strippers and Cutters
f. Butt Splice Crimping Tool
g. Electric Hand Drill

h. 1/16” and 3/8” Drill Bits
i. 5/16” & 7/16” Wrench
j. Heat Gun
k. Caulking Gun
l. Sealant
m. Digital Multimeter (troubleshooting only)
n. Torque Driver (optional)

 

Products covered in this article: Overlander/Overlander (E)/Retreat/Retreat (E)/Weekender/Solar Elite/Solar Extreme Solar Kits

Feedback
0 out of 0 found this helpful

scroll to top icon