SW Inverter 1500TS: Dip Switch (S1 - S8) & Power Saving Mode
Mar 17, 2020
2396
Dip Switch
Power Saving Mode
Power Saving Mode is adjustable and set by the Dip Switches, S4, S5 and S6 on the front panel. Example GP-SW1500TS: Saving set 2%, the load is below 30W 10 sec. will into saving mode, more than 90W or more leave saving mode.
A. Power device enter the saving mode The rate power x setting % = the threshold enter the power saving model. In case the load less than threshold value 5 seconds, the power device will enter the saving mode.
B. Power device leaving saving mode(re-start). Restart threshold = rate power x setting % x 2~3 In case the power over the restart threshold, the power device will re-start and provide the AC power.
