You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Inverter Support > IC Series Inverter/Charger Support > IC 2000 & 3000 Support > IC Series Inverter Charger: Lithium Battery Setup
IC Series Inverter Charger: Lithium Battery Setup
print icon

To set your IC Series Inverter Charger to charge Go Power Lithium batteries, complete the following setps:

 

• Go to Unit Setting and hit enter;

• Scroll through unit setting to battery type and hit enter;

• Scroll to Custom and hit enter;

• Set absorption to 14.4 VDC and hit enter;

• Set Float to 14.1 VDC and hit enter;

• Set equalize to 12.7 VDC and hit enter;

• Scroll to Final Charge and hit enter;

• Scroll to set to Float and hit enter;

 

 

You are now set for charging Go Power 12 volt lithium batteries!

 

Products covered in this article: GP-IC-2000-12, GP-IC-3000-12, GP-ICR-50

Feedback
2 out of 2 found this helpful

scroll to top icon