MOUNTING THE DRIP SHIELD
The IC Series Inverter/Charger is Marine UL listed. In order to properly mount the Inverter/Charger in a marine application, you must use a drip shield. Please follow the installation instructions below.
1. Use the screws to mount the drip shield on the wall.
2. Use the screws to mount the GP-IC-2000/3000 under the drip shield. Please make sure the height from the ground to the GP-IC-2000/3000 is at least
1. Use the screws to mount the drip shield and the Inverter/Charger together to the ceiling.
2. Ensure the Inverter/Charger is centered and that there is at least 8” (20cm) of space between it and the ceiling.