You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Inverter Support > IC Series Inverter/Charger Support > IC 2000 & 3000 Support > IC Series Inverter/Charger: PREPARING THE DC CABLES
IC Series Inverter/Charger: PREPARING THE DC CABLES
print icon

Go Power! supplies 2 ring lugs with the IC Series, which can be used for the Inverter/Charger end of the DC Cables. Source the correct ring terminals for the batteries you are using.

  • Cut the negative and positive cables to the required length.
  • Strip off enough insulation so you can install the ring lugs provided.
  • Use the correct crimp connector to install the ring lugs.
  • Attach the connectors to both ends of both cables. Make sure no stray wire strands protrude from the connectors.
Feedback
0 out of 0 found this helpful

scroll to top icon