You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Inverter Support > IC Series Inverter/Charger Support > IC 2000 & 3000 Support > IC Series Inverter/Charger: REQUIRED TOOLS AND MATERIALS
IC Series Inverter/Charger: REQUIRED TOOLS AND MATERIALS
print icon

Required Tools

a. 13mm or adjustable wrench

b. Screwdriver (Phillips & Flathead)

c. Wire strippers and cutters

d. Electric hand drill and drill bits Optional Tools

e. Keyhole saw

f. Pencil or marker

g. Pliers

h. Caulking gun

i. Sealant

j. Digital multimeter

k. Torque driver

l. Butt splice crimping tool

 

Materials

a. Conduit

b. Strain-reliefs

c. Electrical tape (Black, Red, Green, Blue, Brown, White)

d. Zip-ties

e. Mounting hardware

 

Feedback
0 out of 0 found this helpful

scroll to top icon