Battery Monitor- TEMPLATE
![][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2020/12-08/ceda67eb-e5db-422b-a875-8f566c62ea66/template.jpg
Battery Monitor- SAFETY PRECAUTIONS
![][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2020/12-08/0a112a83-2a6e-4988-b8ac-c81e97e93c78/safety.jpg
Battery Monitor- SPECIFICATIONS
![][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2020/12-08/eaf6b168-6163-4ee8-8943-c5e5532e25aa/specs.jpg
Battery Monitor- WARRANTY LENGTH
Go Power! electronic products are non-repairable, Go Power! does not perform repairs on its products nor does it contract out those repairs to a third party. Go Power! does not supply schematics or replacement parts for any of its electronic products. This Go Power! warranty is valid against defects in materials a…
Battery Monitor- INTERFACE
![][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2020/12-08/c1f22f66-72a6-4104-9c71-5390062da012/interface.jpg
Battery Monitor- WARRANTY RETURN PROCEDURE
Before contacting Go Power!’s customer service department, please read the “frequently asked questions” section of our website to troubleshoot the problem. If trouble persists: 1. Call your Go Power!™ Technical Support team (1-866-247-6527) or 2. Return defective product to place of purchase An RMA number (Return …
Battery Monitor- WIRE CONNECTIONS
1. Before doing anything, disconnect all wires from the negative side of the battery. 2. Cut the negative cable for the battery and crimp on new ring terminals. Alternatively, use a new wire of appropriate gauge to carry the full current demand of the system. 3. Connect the shunt as shown in the wiring diagram above…
Battery Monitor- WIRING DIAGRAM
![][1] **NOTE:** Please connect as shown with all loads and charging sources connected to the "P-" side of the shunt. The shunt must be connected to the negative circuit. DO NOT connect to the positive circuit. [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2020/12-08/85df4f89-384b-43ee-9…
Battery Monitor- MOUNTING THE SHUNT
The shunt comes with a mounting bracket that should be secured using screws to ensure the shunt does not move.
Battery Monitor- SLEEP/WAKE UP
SLEEP/WAKE-UP The GP-BMK-25 will go into a sleep mode if the battery current drops below a certain level. To “wake” the GP-BMK-25 from this mode, press any key. The GP- BMK-25 screen will automatically wake once the battery starts charging or discharging **TURN OFF BACKLIGHT.** While charging the battery, the LCD s…
