IC Series Inverter/Charger: GROUNDING THE INVERTER - AC GROUNDING
# HOW TO GROUND THE INVERTER The IC Series Inverter/Charger should always be connected to a permanent, grounded wiring system. An Inverter/Charger system that is properly grounded will reduce the risk of electric shock, and reduce radio frequency noise. The main aim of any grounding system is to provide a well define…
IC Series Inverter Charger: BASIC SETUP
# **BASIC SETUP** Start the inverter first before plugging into shore power. If shore power is plugged in before the inverter is booted, if shore power is lost, the inverter will shut down. ## **Standby Mode** If the on/off switch on the inverter is applied when plugged into shore power and shore power is lost, the…
IC Series Inverter/Charger: GENERAL OPERATING NOTES
# GENERAL OPERATIONS INSTRUCTIONS **ON/OFF SWITCH** When the Inverter/Charger is first connected to the battery bank, the ON/OFF switch must be lightly pressed to turn the Inverter ON. Once the Inverter has been turned ON, pressing the ON/OFF switch turns the Inverter on and off. ![][1]**WARNING**: The ON/OFF swit…
IC Series Inverter/Charger: IC SERIES FAULT CONDITIONS
# IC SERIES FAULT CONDITIONS The IC Series is protected against fault conditions and in normal use it will be rare to see any. If a fault condition does occur, the Inverter/Charger will shut down as a safety measure to protect itself, the battery bank, and the AC loads. The following fault conditions could be the ca…
